My work was installing a new circuit for my water heater at my shop I was amazed how quickly the job done I am definitely using the service again and booking them for my other shop. Thank you so much and appreciate the great service.👌👌
North Shore
TV wall mounting in Singletons Mill
TV mounting with the bracket, wall construction, viewing position and power or cable arrangements planned together.
A clean, safe install
What’s included in a TV install?
Most of what makes a wall-mounted TV look right is out of sight: a power point behind the screen, cables run inside the wall, and a bracket fixed to something that will hold it. Running new power inside the wall is electrical work, so it needs an electrician.
Tell us the TV size, the bracket if you have one, the wall type and where the other equipment sits. A photo of the wall helps us plan the job.
Plan your budget
TV wall mounting costs
TV mounting with a supplied fixed or swivel bracket has a rounded Sydney planning range of $250–$450, including GST. This covers ordinary installation conditions; masonry, specialist brackets, cable access and new power can change the scope.
Published market guidance, checked 21 October 2026. Xcel quotes your actual job before work starts.
Read the full cost guide- TV mounting with a supplied bracket
- $250–$450Rounded range across published fixed and swivel bracket packages with ordinary plasterboard cable access and TV setup. New power points, masonry, specialist brackets and wall repairs are separate.GST: included after conversion.
- New power point
- $150–$290One standard point, labour and standard materials; no board upgrade or difficult cable route.GST: included.
Your property
Planning the work in Singletons Mill
Access in Singletons Mill can involve narrow river roads, steep paths or water access. Confirm how the property is reached before a visit is arranged; timing depends on that access as well as the work.
The wall and the cable path
Screen size alone does not determine a safe mount. We check the bracket, wall structure and fixing points, then agree how power and signal cables will reach the screen.
Confirm access before booking
Describe the road, path or water access and how materials can reach the property. We confirm whether the visit can be arranged and the expected timing when you contact us.
The wall
Plasterboard, brick and concrete need different fixings, and a large TV needs the studs or masonry. We check the wall before fixing anything.
Where the cables go
Cables can run inside a hollow wall, or in a neat cover on a solid one. Tell us where the set-top box, console or soundbar will sit.
Your bracket
Fixed, tilting and full-motion brackets suit different rooms and TV sizes. You can supply one, or ask us to.
What the quote covers
The written quote sets out the mounting, any new power point, the cable work and who supplies the bracket.
How it works
How a TV mounting job is planned
Tell us about the room
TV size, bracket, wall type and where the equipment sits, with a photo of the wall.
Agree the setup
We confirm the height, the power point position and the cable route, and quote in writing.
Mount, wire and test
We fit the bracket, install the power and cabling, hang the TV and check it all works.
Why Xcel
How we mount TVs
Power done properly
A new power point behind the TV is electrical work. We do it to the Wiring Rules, rather than running an extension lead behind the wall.
One visit for the room
Mounting, power, cabling and any lighting changes planned together, so the room is finished in one go.
Insured
Insured electricians, working in your home with care for walls and finishes.
12-month workmanship warranty
Our workmanship carries a 12-month warranty, covering the fixing and the electrical work.
Customer reviews
See what our customers say
Feedback from Xcel Electrical customers across Sydney.
Fantastic tradesmen excellent service would have them back in a heart beat
Selected customer reviews from Google.
Read all reviews on GoogleYour questions
TV wall mounting questions
Can you hide the cables behind the wall?
On a hollow plasterboard wall, usually yes: cables run inside the wall from behind the TV to the cabinet below. On brick or concrete, a neat surface cover is often the practical choice. We check the wall and explain the options in the quote.
Why does the power point need an electrician?
Moving or adding a power point, or running mains power inside a wall, is electrical wiring work. In NSW it must be done by a licensed electrician. Pushing a power cord through the wall is not a safe substitute.
Can you mount a large TV on plasterboard?
A large TV should be fixed into the wall studs, not just the plasterboard. We find the studs and use fixings rated for the TV and bracket. If the studs don’t line up with where you want the TV, we’ll talk you through the options.
Do you supply the bracket?
Either works. Tell us the TV make and size and whether you have a bracket. If you’d like us to supply one, the quote will list it separately.
What access should I arrange for the visit?
Explain how the property is reached, including any water access, narrow road, gate or track, and how equipment can be brought in. We confirm the access arrangements before booking.
Arrange TV wall mounting in Singletons Mill
Tell us about the property and the work you need. We’ll confirm the scope and a written quote.
Based in Ryde. Working across Sydney.
24/7 emergency help