My work was installing a new circuit for my water heater at my shop I was amazed how quickly the job done I am definitely using the service again and booking them for my other shop. Thank you so much and appreciate the great service.👌👌
Hills District
Oven & cooktop installation in Beaumont Hills
Electrical connection and replacement of ovens and cooktops, with the appliance requirements checked against the existing circuit and supply.
New appliances, the right circuit
What are you installing?
Electric ovens and induction cooktops draw a lot of power. Many need their own circuit, and some need a heavier cable or space on the switchboard. We check what your kitchen has before the appliance arrives, so installation day goes to plan.
Send us the make and model and a photo of where it’s going, plus a photo of the switchboard if you can. Gas appliances need a licensed gasfitter for the gas connection; we look after the electrical side.
Plan your budget
Oven and cooktop installation costs
A standard oven or cooktop electrical connection has a published Sydney range of $220–$440, including GST. This assumes a suitable circuit and excludes the appliance, new circuits, cabinetry and gas work.
Published market guidance, checked 21 October 2026. Xcel quotes your actual job before work starts.
Read the full cost guide- Oven or cooktop connection
- $220–$440Standard appliance connection to a suitable dedicated circuit; appliance purchase and circuit upgrades excluded.GST: included after conversion.
- Home switchboard upgrade
- $1,500–$3,000Typical residential upgrade. This is not a ceiling: extra circuits, defects, asbestos or supply work can take a job outside this range.GST: included.
Your property
Planning the work in Beaumont Hills
Homes in Beaumont Hills include predominantly separate houses. A previous renovation does not establish the condition or capacity of the wiring.
Check the model before installation
Older kitchen circuits may not suit modern cooking equipment. We assess cable capacity, protection and isolation, and separate any circuit upgrade from the appliance connection in the quote.
The appliance’s requirements
The installation manual sets the circuit rating and connection method. Send the model so we can check it against your existing wiring.
Your circuit and switchboard
An old cable, an undersized circuit or a full switchboard can mean extra work before a high-load appliance can be connected. We tell you before you buy, where we can.
Fitting into the cabinetry
A built-in oven or cooktop must suit the cut-out and the cabinet. Benchtop or joinery changes are a separate trade.
What the quote covers
The written quote sets out the connection, any new circuit, isolating switch or switchboard work, and removal of the old appliance if you want us to take it.
How it works
How an appliance installation is planned
Send the model
Tell us the appliance and where it’s going, with photos of the kitchen and the switchboard.
Check and quote
We check the circuit and supply, then confirm the work and price in writing.
Connect and test
We connect the appliance, test the circuit and make sure everything works before we leave.
Why Xcel
How we connect kitchen appliances
Checked before you buy
Ask us before ordering an induction cooktop, and we’ll tell you whether your circuit and switchboard can take it.
The whole kitchen in one visit
Cooktop, oven, rangehood and extra power points planned together, so the kitchen is only disrupted once.
Insured
Insured electricians, with appliances connected to the Wiring Rules (AS/NZS 3000) and the manufacturer’s instructions.
12-month workmanship warranty
Our workmanship carries a 12-month warranty. The appliance itself is covered by its manufacturer’s warranty.
Customer reviews
See what our customers say
Feedback from Xcel Electrical customers across Sydney.
Fantastic tradesmen excellent service would have them back in a heart beat
Selected customer reviews from Google.
Read all reviews on GoogleYour questions
Oven and cooktop questions
Can I switch from a gas cooktop to induction?
Usually, yes, but it is more than a swap. Induction cooktops typically need a dedicated circuit with a heavier cable than a standard power point, and the switchboard needs room and capacity for it. We check your supply and switchboard and quote the full job.
The old gas connection must be capped by a licensed gasfitter. We handle the electrical work.
Can you just plug in my new oven?
Some ovens plug into a power point, but many are hardwired or need their own circuit. The installation manual says which. Send us the model and a photo of the existing connection, and we’ll tell you what’s needed before the appliance arrives.
Do you install gas cooktops?
We do the electrical side, such as the power point for the ignition, but the gas connection must be done by a licensed gasfitter. If you are replacing gas with an electric or induction cooktop, we can do the electrical installation once the gas is capped.
Will you take the old appliance away?
Tell us when you ask for a quote. Removal of the old oven or cooktop can be included, and the quote will show it.
What access should I arrange for the visit?
Keep the work area and switchboard accessible, tell us about parking or locked gates, and arrange entry to any rooms involved. Mention restricted ceiling or underfloor access when enquiring; you do not need to enter these spaces yourself.
Arrange oven & cooktop installation in Beaumont Hills
Tell us about the property and the work you need. We’ll confirm the scope and a written quote.
Based in Ryde. Working across Sydney.
24/7 emergency help