My work was installing a new circuit for my water heater at my shop I was amazed how quickly the job done I am definitely using the service again and booking them for my other shop. Thank you so much and appreciate the great service.👌👌
North Shore
Switchboard upgrades in Huntleys Cove
Switchboard assessment, safety switches and circuit upgrades planned around the existing supply and the equipment you want to run.
Protection and capacity
Does your switchboard need upgrading?
An old fuse board can struggle with modern appliances and may leave circuits without safety switch protection. We check the fuses, backing board, wiring and existing protection before recommending a switchboard upgrade or replacement.
Frequent trips, a renovation or a new appliance such as air conditioning or an EV charger are common reasons to have the board checked. You get a written quote and a clear explanation of the work.
Plan your budget
Switchboard upgrade costs
A typical home switchboard upgrade has a published Sydney planning range of $1,500–$3,000, including GST. Extra circuits, defects, asbestos or supply changes can take a job outside this range.
Published market guidance, checked 21 October 2026. Xcel quotes your actual job before work starts.
Read the full cost guide- Home switchboard upgrade
- $1,500–$3,000Typical residential upgrade. This is not a ceiling: extra circuits, defects, asbestos or supply work can take a job outside this range.GST: included.
- Safety switch on a circuit
- $200–$400A suitable existing board and standard installation; a board replacement is a separate job.GST: included.
Selected work
One switchboard job, start to finish
The same meter box before, during and after an upgrade by Xcel: an old fuse board replaced with circuit breakers and safety switches.
Your property
Planning the work in Huntleys Cove
Apartment work in Huntleys Cove needs the lot’s installation distinguished from shared services. The building manager can confirm meter-room access, work hours and contractor requirements.
Board condition and capacity
A unit board and the building’s main board are different jobs. We establish which equipment serves the lot, where it is located and whether a shared shutdown or strata approval is needed.
Capacity for the work you have planned
Tell us about appliances, an EV charger or renovation circuits you expect to add. We assess the existing supply, circuit protection and space in the board together, and separate any network-side work from the switchboard quote.
Older boards need care
Ceramic fuses, timber backing boards and boards that may contain asbestos need careful assessment. We explain what we find, and any extra work it involves, before quoting.
How it works
What a switchboard upgrade involves
Assess and agree the work
We inspect the switchboard, discuss what you use and plan to add, and check for safety concerns. You get a recommendation and a written quote.
Plan and install
We order the parts, arrange any network operator coordination and book a time that suits you, then replace the board with the power safely isolated.
Test and hand over
We test the new board and every safety switch, provide a Certificate of Compliance for Electrical Work (CCEW) and show you how to test your safety switches.
Why Xcel
What you get with a new switchboard
Insured electricians
Switchboard work is done by insured electricians, to the Wiring Rules (AS/NZS 3000) and NSW requirements, with a 12-month workmanship warranty.
Every circuit labelled
Each circuit is labelled on the new board, so you can tell which breaker controls what when you need to switch something off.
Room for what comes next
We leave space for extra circuits where practical, so solar, a battery or an EV charger can be added later.
Urgent faults
Same-day service is sometimes available for urgent switchboard faults, and an unsafe board is covered by our 24/7 emergency service.
Customer reviews
See what our customers say
Feedback from Xcel Electrical customers across Sydney.
Fantastic tradesmen excellent service would have them back in a heart beat
Selected customer reviews from Google.
Read all reviews on GoogleYour questions
Switchboard upgrade questions
How do I know if my switchboard needs upgrading?
Common signs are breakers that trip often or fuses that blow, buzzing or crackling at the board, visible damage or rust, ceramic fuses or a timber backing board, no safety switches, and not enough circuits for what you use. Planning a renovation or a large new appliance is another reason to have it checked. Our guide to the signs you need a switchboard upgrade explains each one.
A burning smell or a hot, crackling board is urgent: call 0404 121 983. Otherwise, we can inspect the board and tell you whether it needs an upgrade or a smaller repair.
How much does a switchboard upgrade cost in Sydney?
A typical home switchboard upgrade has a published Sydney planning range of $1,500–$3,000, including GST. Extra circuits, defects, asbestos or supply changes can take a job outside this range. These are published planning ranges, not Xcel rates. We confirm a written quote for your property and agreed scope before work starts.
How long does a switchboard upgrade take to complete?
A standard home switchboard upgrade typically takes 4–8 hours, depending on the installation and the scope of work. Adding safety switches might take 2–3 hours, while a complete replacement for a larger home, or one with extra work, can take a full day. Commercial switchboard upgrades generally take 1–2 days.
The power is off for most of the job, so plan for fridges and anything else that needs power. We confirm the timeframe after seeing the board, and businesses can book the work after hours.
Are safety switches (RCDs) mandatory in Sydney homes?
The Wiring Rules (AS/NZS 3000) require safety switch (RCD) protection for power and lighting circuits in new homes and for new electrical work. Many older homes were wired before that applied, so some of their circuits may have no RCD protection.
When we upgrade a switchboard, the new board includes RCD protection to current standards. If you’re not sure whether your home is protected, look for a test button on the switchboard, or ask us to check. Requirements can change, so for anything specific, check current NSW requirements.
How do I maintain my new switchboard after an upgrade?
Keep the area around the switchboard clear, dry and easy to reach. Test your safety switches (RCDs) every three months using the test button; each one should trip straight away.
We suggest an inspection by a licensed electrician every 3–5 years for residential properties, and more often for commercial installations. Don’t attempt repairs or changes to the switchboard yourself.
If you notice frequent tripping, a burning smell, buzzing or visible damage, contact a licensed electrician straight away.
What access should I arrange for the visit?
Keep the work area and switchboard accessible, tell us about parking or locked gates, and arrange entry to any rooms involved. For an apartment or shared building, also check meter-room access, lift bookings and permitted work hours with the building manager. Confirm approval for work affecting common property.
Arrange switchboard upgrades in Huntleys Cove
Tell us about the property and the work you need. We’ll confirm the scope and a written quote.
Based in Ryde. Working across Sydney.
24/7 emergency helpInclude the address, any switchboard symptoms and planned new equipment or circuits. Let us know about access and power interruption requirements. Photos can help explain the job.